GR180 motor grader

1.New appearance design. 2.The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius,maneuvering and flexible. 3.The electro-hydraulic controls the power shift gearbox,with 6ahead gears and 3 back gears. 4.The international matching hydraulic parts are adopted,with reliable operation. 5.The motions of the blade are fully hydraulically controlled. 6.The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism. 7.The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable,with convenient application,and the comfort of driving is improved . 8.The cab is grand and nice,with wide eyeshot and good sealing . 9.The front bulldozing plate, rear scarification device,front scarification harrow and automatic leveling device can be added . Basic specificationEngine model6CTAA8.3 D6114Rated power/speed138kW/2200 140kW/2300rpmDimension(LxWxH)8900×2625×3470mmOperating weight(Standard)15400kgPerformance specificationTravelling speed ,forward5,8,11,19,23,38 km/hTravelling speed ,reverse5,11,23 km/hTractive force(f=0.75)79KNMax. gradeability20%Tire inflation pressure260 kPaWorking hydraulic pressure16 MPaTransmission pressure1.3 1.8MPaOperating specificationMax. steering angle of front wheels±50°Max. lean angle of front wheels±17°Max. oscillation angle of front axle±15°Max. oscillation angle of balance box15Frame articulation angle±27°Min. turning radius using articulation7.3mBiadeMaximum lift above ground450mmMaximum depth of cutting500mmMaximum blade position angle90°Blade cutting angle28°—70°Circle reversing rotation360°Moldboard width X height3965×610mm